Active Ingredients: 60% Poly [oxyethylene (dimethyliminio) ethylene (dimethyliminio) ethylene dichloride]
40% Other Ingredients. Available in 1 qt. Bottles. Algaecide 60 is used to kill and control the growth of algae, including "black algae", in swimming pools. Do not mix with concentrated dry or liquid chlorine products.
Active Ingredients: 100% Sodium Bicarbonate. Available in 9 lb. Bottles. Water should be maintained at approximately 100 -- 150 ppm. Alkalinity Rise should be added when necessary to increase the alkalinity of water. Can be used with non-chlorine products.
Active Ingredients: 68% Calcium Hypochlorite. 32% Other Ingredients. Available chlorine 65%. Available in 1 lb. Bags. Use 1 lb. Per 10,000 gal. Calcium Shock controls growth of algae and effectively kills many bacteria thus helping to keep the pool in a sanitary condition. When mixing, add product to water in a clean pail. DO NOT add water to the product. Burns algae out fast. Must wait 12 hours before swimming. Ideal for plaster and concrete pools.
Active Ingredients: 97% Sodium Dichloro-s-Triazinetrione. 3% Other Ingredients. Available Chlorine 64%. Available in 5 lb., 10 lb., and 50 lb. Buckets. Chlorine powder is meant to help keep bacteria and algae under control in swimming pools.
Active Ingredients: 100% Cyanuric Acid. Available in 4 lb. Bottles. Chlorine Stabilizer is meant to prevent chlorine burn off by sun thereby cutting down on chlorine use.
Active Ingredients: 99% Trichloro-s-Triazinetrione, 1% Other ingredients. Approximately available chlorine 90%. Available in 1" or 3" tablets. 1" tablets available in 5 lb., 10 lb., and 50 lb. Buckets. 3" tablets available in 5 lb., 10 lb., 25 lb., and 40 lb. Buckets. Chlorine tablets are meant to help keep bacteria and algae under control in swimming pools.
Available in 1 qt. Bottles. A concentrated liquid that helps settle out suspended particulates that cause cloudiness and discoloration of pool water. Safe to use with chlorine and non-chlorine products.
Active Ingredients: 29% Lithium Hypochlorite, 71% Other Ingredients. Available chlorine 35%. Available in 1 lb. Bags. Product is fast acting and dissolves easily even in colder water, no need to dilute. It is good for treating algae. Does not boost free chlorine level. Must wait 12 hours before swimming. Use 1 lb. Per 8,000 gal.
Active Ingredients: 100% Sodium Bisulfate. Available in 3 and 6 lb. Bottles. PH Lower is meant to lower the pH and alkalinity of swimming pool water. Dissolve in water only. Do not add directly to pool water. Do not mix with other pool chemicals. Can be used with non-chlorine pool chemicals.
Active Ingredients: 100% Sodium Carbonate. Available in 2.5 and 5 lb. bottles. PH Rise is meant to increase the pH of swimming pool water. Dissolve in water only or add directly to pool water. Do not mix with other pool chemicals. Can be used with non-chlorine pool chemicals.
Available in 1 qt. Bottles. For removing phosphate from swimming pools, ponds, and lakes.
Active Ingredients: 57% Sodium dichloro-s-triazinetrione, 43% other ingredients. Available chlorine 35%. Available in 1 lb. Bags. Fast acting. Good for treating algae. Will boost free chlorine level. Must wait 12 hours before swimming. Use 2 lb. Per 7,500 gal. Pre-dissolve; add 1 pound to 2- 3 gallons of water in clean bucket.
Active Ingredients: Potassium Monopersulfate. Shock Plus contains no chlorine or other disinfectant and should be used for shock treating only. Available in 1 lb. Bags. Fast acting. Dissolves easily no need to dilute. Can swim 30 minutes after use. Does not kill algae. Use 1 lb. Per 10,000 gal.
Available in 1 qt. Bottles. A concentrated sequestering agent used to control copper, iron, and manganese in pools, spas, and hot tubs. Helps remove most stubborn stains and dissolves calcium scale.
Stain and Scale Preventer
Available in 1 qt. Bottles. Stain & Scale Preventer is a special product of Polymer Chemistry that was developed to cope with extreme problems due to minerals, (calcium, manganese, iron, and copper. When used according to directions, it will gradually correct all mineral problems such as scaling, staining and water discoloration. In extreme hard water areas Stain & Scale Preventer acts as an anti-nucleating agent, preventing the precipitation of calcium scale in pool equipment. Effective at high temperatures of pool heater and works well in presence of chlorine.
Available in 12 oz. Bottles. Liquid Solar Cover.
Ultra Blue Clarifier
Available in 1 qt. Bottles. A highly concentrated cationic polymeric flocculent designed to coagulate and floc suspended solids from water. The solids will collect on the filter and at the bottom of the pool or spa for removal by backwashing and vacuuming.
Available in 2 and 4 lb. jars. Yellow Out will not kill algae; but when used with EPA registered chlorine that kills the green, brown, pink or mustard algae, clean up is achieved quickly and economically without brushing.
Active Ingredients: 50% Didecyl deimethyl ammonium chloride, 50% Other ingredients. Available in 1 qt. Bottles. Effective against green, black, mustard algae and algal slime.
Biguan Chlorine Neutralizer
Active Ingredients: 100% Sodium Sulfite. Available in 1 qt. bottles. Removes chlorine from your pool before using Biguan Sanitizer.
Chlorine free swimming pool sanitizer. Available in ½ gallon bottles.
27% Hydrogen Peroxide. Available in 1 gallon bottles. Used to control algae and cloudy water problems.
Available in 1 qt. Bottles. Clarifies cloudy water. Gathers stain-causing metals like iron, copper, zinc, and manganese and deposits them in your filter where they stay until you flush them out. Takes the water dulling soaps and oils out of your water but will not deposit them on surfaces or clog your filter. Will not harm plants, animals, or fish.